When removing or installing the fuel feed hose/line, or when disconnecting or connecting the quick-connect fittings, pay attention to the following:
NOTE: Replace the fuel feed hose, fuel line, or the quick-connect fitting to new one if it damaged.
|
|
No heat-resistance; Be careful not to damage them during welding or other heat-generating procedures. |
|
|
No acid-proof; Do not touch them with a shop towel that was used for wiping 12 volt battery electrolyte or something similar. |
|
|
No stress-resistance; Be careful not to bend or twist the fuel feed hose/line excessively. |
A disconnected quick-connect fitting can be reconnected, but the retainer on the mating line cannot be reused once it has been removed from the line.
Replace the retainer when:
|
|
Replacing the fuel feed line |
|
|
Replacing the fuel rail |
|
|
Replacing the fuel tank unit |
|
|
Replacing the fuel filter |
|
|
Replacing the EVAP canister (USA and Canada models) |
|
|
Replacing the EVAP purge line (USA and Canada models) |
|
|
Replacing the fuel fill pipe (USA and Canada models) |
|
|
Replacing the fuel tank |
|
|
The retainer has been removed from the pipe |
|
|
The retainer is damaged |
NOTE: Use the same manufacturer retainer and the same size retainer when the replacing the retainer.
|
Location |
Manufacturer |
Retainer color |
Piping diameter |
Remarks |
|
Fuel feed pipe (A) |
Sanoh |
White |
0.2500 in
(6.35 mm) |
|
|
Fuel feed pipe (B) |
Tokai |
Green |
0.2500 in
(6.35 mm) |
|
|
Fuel tank unit (C) |
Sanoh |
White |
0.374 in
(9.5 mm) |
|
|
Breather pipe (D) |
Tokai |
Natural |
0.47 in
(12 mm) |
USA and Canada models |
|
Fuel filler pipe (E) |
Tokai |
Orange |
1.126 in
(28.6 mm) |
USA and Canada models |
|
Breather pipe (F) |
Tokai |
Green |
16 mm
(0.62 in) |
Mexico models |
|
Vent return pipe (G) |
Tokai |
Natural |
0.47 in
(12 mm) |
USA and Canada models |
|
EVAP canister (H) |
Sanoh |
White |
0.374 in
(9.5 mm) |
USA and Canada models | |
|
