A/C Refrigerant Oil Replacement
Special Tools Required
Image Description/Tool Number
6071780.png Oil Injector Tool Robinair ROB16256*, commercially available
*This tool is available through the Honda Tool and Equipment Program; call 888-424-6857
1. A/C Refrigerant Oil - Replace

Recommended PAG oil: SP-10

P/N 38897-P13-A01AH: 120 mL (4 fl oz)

It is important to have the correct amount of refrigerant oil in the A/C system to ensure proper lubrication of the A/C compressor. Too little oil damages the A/C compressor; too much oil reduces the cooling capacity of the system, and can produce high vent temperatures.
To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
Do not spill the refrigerant oil on the vehicle; it may damage the paint; if it gets on the paint, wash it off immediately.

A/C condenser
(including Dryer Desiccant) .........

25 mL (5/6 fl oz)
Evaporator ......................................
40 mL (1 1/3 fl oz)
Line or hose ...................................
10 mL (1/3 fl oz)
Dryer desiccant .............................
10 mL (1/3 fl oz)
Leakage repair ..............................
25 mL (5/6 fl oz)
A/C compressor ............................
Since the oil separator is equipped inside the A/C compressor for this vehicle, oil drainage is unnecessary at the time of A/C compressor replacement.