Both Front Wheel Arch Protectors Front Side - Remove
NOTE: Repeat this procedure on the opposite side.
1.
Remove the screws (A) and the clips (B).
2.
Detach the clips (C, D) with the trim tool, then detach the front wheel arch protector (E) front side as needed.
3.
Put a shop towel (A) in the opening between the front wheel arch protector and the front fender.
2.
Front Bumper - Remove
1.
Remove the screws (A), the bolts (B), and the clips (C).
2.
Pull out the front bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.
NOTE: Repeat this procedure on the opposite side.
3.
Detach the clips (A).
NOTE: Repeat this procedure on the opposite side.
4.
With the help of an assistant, while pulling the front bumper (A) away from the side spacer (B), release the bumper from the hooks (C) on the upper beam.
NOTE: Repeat this procedure on the opposite side.
5.
For some models: Disconnect the connectors (A).
6.
With the help of an assistant, remove the front bumper (B).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
