12 Volt Battery Sensor Removal and Installation
1. 12 Volt Battery Sensor - Remove
1.
Make sure the vehicle to the OFF (LOCK) mode.
2.
Disconnect the connector (A).
3.
Disconnect the cable (B) from the 12 volt battery sensor.
4.
Remove the 12 volt battery sensor (C) from the 12 volt battery.
NOTE: To protect the connector (D) from damage, do not hold it when removing the terminal (E).

1. 12 Volt Battery Sensor - Install
1.
Install the 12 volt battery sensor (A) to the 12 volt battery.
NOTE:
Make sure the areas between the terminal and the 12 volt battery sensor (A) is clean.
To protect the connector (B) from damage, do not hold it when installing the terminal (C).
2.
Install the cable (D) on the 12 volt battery sensor (A).
3.
Connect the connector (E).
4.
Apply multipurpose grease to the terminals to prevent corrosion.