Horn Removal, Installation, and Test
Horn (Low)

1. Horn (Low) and Bracket Assembly- Remove
1.
Remove the horn (A) and the bracket (B) as an assembly.
2.
Disconnect the connector, and detach the harness clip.

2. Horn (Low) - Remove
1.
Remove the horn (low) (A) from the bracket (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Horn (High)

1. Splash Shield - Remove


2. Horn (High) - Remove
1.
Disconnect the connector.
2.
Remove the horn (high) (A).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Horn - Test
1.
Test the horn by momentarily connecting 12 volt battery power to the terminal (A) and grounding the bracket (B). The horn should sound.
2.
If it fails to sound, replace the horn.