Immobilizer-Keyless Control Unit Removal and Installation

NOTE:
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
If the immobilizer-keyless control unit is replaced, do the immobilizer-keyless control unit registration. If the original immobilizer-keyless control unit is installed, confirm that all systems work properly.

2. Immobilizer-Keyless Control Unit - Remove


1.
Disconnect the connector.

2.
Remove the immobilizer-keyless control unit (A).

3. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.