Adjust the washer nozzles by gently gripping, and then moving, the outside of each nozzle (A).
Do not insert tools into the nozzle hole (B), as it may cause the washer fluid to spray incorrectly.
Wiper Arms Park Position
1.
Turn the vehicle to the ON mode, then turn the wiper switch ON, and then back OFF.
2.
When the wiper arms stop at the auto-stop position, make sure that they are at the correct position.
a: Position at about 1.65 in (42 mm) from the top of the cowl cover (C).
b: Position at about 1.02 in (26 mm) from the top of the cowl cover (C).
Washer Nozzle Position
3.
When you turn on the washer, make sure 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzle(s).
d: Position at about 9.84 in (250 mm) from the windshield center line (D).
e: Position at about 6.748 in (171.4 mm) from the bottom of the black ceramic area (E) at the lower windshield.
f: Position at about 2.134 in (54.2 mm) from the windshield center line (D).
Rear Window
2.
Wiper Arm/Nozzle - Adjustment
Adjust the washer nozzle by gently gripping, and then moving, the outside of nozzle (A).
Do not insert tools into the nozzle hole (B), as it may cause the washer fluid to spray incorrectly.
Wiper Arm Park Position
1.
Turn the vehicle to the ON mode, then turn the wiper switch ON, and then back OFF.
2.
When the wiper arm stop at the park position, make sure it is at the correct position.
a: Wiper arm stop position on the rear window defogger.
Washer Nozzle Position
3.
When you turn on the washer(s), make sure 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzle.
b: Position at about 4.272 in (108.5 mm) from the rear window center line (C).
d: Position at about 0.835 in (21.2 mm) from the top of the glass end (D).
e: Position at about 0.862 in (21.9 mm) from the top of the glass end (D).
