Parking Brake Shoe Lining Break-in
1. Parking Brake Shoe Lining - Break-in

Do this operation in a safe area.

NOTE:
Do the brake lining surface break-in when replacing shoes with new brake linings and/or new rear brake disc/drum.
Check the number of parking brake pedal clicks. Adjust the parking brake before lining surface break-in.
1.
Park the vehicle on a firm, level surface.
2.
Release the parking brake pedal.
3.
Press the parking brake pedal 4 clicks.
4.
Drive the vehicle for 0.25 mile (400 m) at about 31 mph (50 km/h).
5.
Stop the vehicle, and release the parking brake for 5?10 minutes to allow the brake disc/drum to cool.
6.
Repeat steps 3 through 5 two more times.