Wheel Speed Sensor Removal and Installation
Front

3. Front Wheel Speed Sensor - Remove
1.
Release the connector holding clamps (A).
2.
Disconnect the connector (B).
3.
Remove the clips (C).
4.
Remove the wheel speed sensor (D).

Rear

3. Rear Wheel Speed Sensor - Remove
1.
Release the connector holding clamps (A).
2.
Disconnect the connector (B).
3.
Remove the clips (C).
4.
Remove the wheel speed sensor (D).


NOTE:
Install the sensor carefully to avoid twisting the wires.
If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
Make sure there is no debris in the sensor mounting hole.

Front

1. Front Wheel Speed Sensor - Install
1.
Install the wheel speed sensor (A).
2.
Install the harness clips (B).
3.
Connect the connector (C).
4.
Connect the connector holding clamps (D).

Rear

1. Rear Wheel Speed Sensor - Install
1.
Install the wheel speed sensor (A).
2.
Install the harness clips (B).
3.
Connect the connector (C).
4.
Connect the connector holding clamps (D).