Propeller Shaft Removal and Installation
4. Propeller Shaft - Remove
1.
Remove the No. 1 propeller shaft protector (A).
2.
Remove the No. 2 propeller shaft protector (A).
3.
Make reference mark (A) across the No. 1 propeller shaft (B) and the transfer companion flange (C).
4.
Remove the No. 1 propeller shaft flange bolts (D).
5.
Make reference mark (A) across the No. 2 propeller shaft (B) and the rear differential companion flange (C).
6.
Remove the No. 2 propeller shaft flange bolts (D).
7.
Remove the center support bearing mounting bolts (A), then remove the propeller shaft assembly (B).

5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Set the No. 1 propeller shaft to the transfer companion flange by aligning the reference mark you made during the removal procedure.

6. Test Drive - Check

NOTE: Test drive the vehicle on the road, not on the lift.