Solenoid Wire Harness A Removal and Installation

NOTE:
Keep all foreign particles out of the transmission.
The solenoid wire harness A and the transmission fluid temperature sensor are not available separately. Replace them as a set.

3. Solenoid Wire Harness A Connector - Disconnect
NOTE: To prevent damage, cover the connector (A) using a shop towel.


5. Solenoid Wire Harness A - Remove
1.
Remove solenoid wire harness A with the O-ring (B).

6. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Be sure to use a new O-ring when installing solenoid wire harness A.
Install solenoid wire harness A vertically to prevent damaging the O-ring.