Rocker Arm Assembly Removal and Installation
2. Rocker Arm Assembly - Remove

1. Rocker Arm Assembly - Reassemble
1.
If the rocker arm assembly is disassembled, reassemble the rocker arm assembly.

2. Rocker Arm Assembly - Install
1.
Apply liquid gasket to the cylinder head mating surface of the No. 5 rocker shaft holder and to the inside edge of the threaded bolt holes.
2.
Install the lost motion assembly in the cylinder head.
NOTE: Apply new engine oil to the lost motion assembly.
3.
Install the rocker arm assembly (A) on the cylinder head.