|
HandsFreeLink System Self-Diagnostic Function
How to Check the HandsFreeLink System Status
NOTE:
|
|
|
|
|
The self-diagnostic function can only be initiated while the HFL system is in its idle state. |
|
|
The self-diagnostic function starts after you press and hold the HANG-UP/BACK button on the HFL switch for 5 seconds, and ends if the HandsFreeLink control unit returns to its idle state. |
|
1. |
Turn the vehicle to the ON mode. |
|
2. |
Press and hold the HANG-UP/BACK button (A) for more than 5 seconds. |
|
3. |
When the HFL system enters the self-diagnostic function, the following will occurs:
|
|
|
|
|
If the HFL system is OK, and there are no HFL DTCs, the HFL system says, ‘‘The HFT is OK.’’ |
|
|
If there are any HFL DTCs stored, the HFL system says, ‘‘The HFT is NG.’’. Check for HFL DTCs. | | | 