12 Volt Battery Terminal Disconnection and Reconnection
1. 12 Volt Battery Terminal - Disconnect
1.
Make sure the vehicle to the OFF (LOCK) mode.
2.
Disconnect and isolate the cable with the 12 volt battery sensor (A) from the 12 volt battery.
NOTE:
Always disconnect the negative side first.
To protect the 12 volt battery sensor connector (B) from damage, do not hold it when removing the terminal.
Do not disconnect the 12 volt battery sensor from the cable (C).
3.
Disconnect the terminal (D) from the 12 volt battery.

1. 12 Volt Battery Terminal - Reconnect
NOTE: If the 12 volt battery performs abnormally, test the 12 volt battery.
1.
Clean the 12 volt battery terminals.
2.
Connect the terminal (A) to the 12 volt battery.
NOTE: Always connect the positive side first.
3.
Connect the cable (B) and the 12 volt battery sensor (C) to the 12 volt battery.
NOTE: To protect the 12 volt battery sensor connector (D) from damage, do not hold it when installing the terminal.
4.
Apply multipurpose grease to the terminals to prevent corrosion.