Rear Upper Arm Removal and Installation
3. Knuckle - Support


1.
Position a floor jack at the connecting point of the trailing arm (A) and the knuckle (B).

2.
Raise the floor jack until the suspension begins to compress.

4. Upper Arm - Remove

1.
Remove the wheel speed sensor harness bracket (A).





2.
Remove the flange bolts (A), and remove the upper arm (B).

NOTE: Use new flange bolts during reassembly.

5. All Removed Parts - Install

1.
Install the upper arm in the reverse order of removal.

NOTE: Loosely install nuts and/or bolts to install the bushings, load the suspension with the vehicle’s weight, and then tighten the nuts and/or bolts to the specified torque.