Keyless Access System Symptom Troubleshooting - The doors will not unlock (lock is normal) with keyless access or with the keyless remote buttons, or the doors will not lock (unlock is normal) with keyless access or with the keyless remote buttons
The doors will not unlock (lock is normal) with keyless access or with the keyless remote buttons, or the doors will not lock (unlock is normal) with keyless access or with the keyless remote buttons
The doors will not unlock under the following conditions:
When the keyless remote is far from the vehicle.
When the operation is made without the keyless remote.
When the doors are already unlocked.
When the vehicle speed signal is detected.

The doors will not lock under the following conditions:
When the keyless remote is far from the vehicle.
When the operation is made without the keyless remote.
When the doors are already open.
When the vehicle is in ACCESSORY or ON modes.
1.
Touch sensor circuit check:

Touch sensor circuit check
?1.
Select HISTORY CLEAR from the ONE-PUSH START system select menu with the HDS.

  

?2.
Select HISTORY DATA from the ONE-PUSH START system select menu with the HDS.

?3.
Touch the each door outer handle touch sensor and push the lock button, then check the HISTORY DATA.
History Data
DRIVER DOOR UNLOCK SWITCH
OK
DRIVER DOOR LOCK SWITCH
OK
FRONT PASSENGER DOOR UNLOCK SWITCH
OK
FRONT PASSENGER DOOR LOCK SWITCH
OK

Is all the information OK?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
2.
Door lock actuator operation check 1:

Door lock actuator operation check 1
?1.
Get out of the vehicle with the keyless remote, and close all doors.

?2.
Push the UNLOCK button of the keyless remote at least 10 times.

Do the door lock actuators work normally?

     
YES
     
     
     
Go to step 3.
     
NO
     
     
     
Go to step 6.
3.
Door lock actuator operation check 2:

Door lock actuator operation check 2
?1.
Push the LOCK button of the keyless remote at least 10 times.

Do the door lock actuators work normally?

     
YES
     
     
     
Intermittent failure, the system is OK at this time.?
     
NO
     
     
     
Go to step 4.
4.
Determine possible failure area (keyless remote, others):

Determine possible failure area (keyless remote, others)
?1.
Push the LOCK and the UNLOCK buttons of the keyless remote, and check if the LED come on.

Does the LED come on?

     
YES
     
     
     
Go to step 5.
     
NO
     
     
     
Replace the keyless remote.?
5.
Keyless access system check 1:

Keyless access system check 1
?1.
With all doors closed, check the parameter(s) below with the HDS.
Signal
Threshold
Current conditions
Values
Unit
Value
Unit
Driver's Door Switch
OFF
     
Front Passenger's Door Switch
OFF
     
Driver's Rear Door Switch
OFF
     
Passenger's Rear Door Switch
OFF
     

Are all data list values correct?

     
YES
     
     
     
     
NO
     
     
     
Check the each door switch circuit.?
6.
Door lock actuator operation check 2:

Door lock actuator operation check 2
?1.
Push the LOCK button of the keyless remote at least 10 times.

Do the door lock actuators work normally?

     
YES
     
     
     
Go to step 7.
     
NO
     
     
     
7.
Keyless access system check 1:

Keyless access system check 1
?1.
Push the LOCK and the UNLOCK buttons of the keyless remote, and check if the LED come on.

Does the LED come on?

     
YES
     
     
     
     
NO
     
     
     
Replace the keyless remote.?