Center Console Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

4. Center Console Assembly - Remove
1.
Pry out the center lower cover (A) to detach the clips (B), then remove the center lower cover.
2.
Remove the bolt (C).
3.
Remove the bolt (A).
4.
Remove the bolts (A).
5.
Disconnect the connectors (A), and remove the clips (B).
NOTE: The positions and number of connectors vary depending on models.





6.
Slide both front seats fully rearward, and recline the seat-backs around two thirds to the rear.
7.
Remove the center console (A).

5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.