CR-V RM1/RM4,RE5/RE6 year 2012-2016
Twitter
Facebook
Snapchat
Instagram
Medium
Front Door Latch Removal and Installation
1.
Front Door Center Lower Channel - Remove
2.
Front Door Latch - Remove
1.
Detach the cables (A) from the cable clip (B).
2.
Remove the bolts (C) with a TORX T30 bit.
3.
Slide the front door latch (A) down to disconnect the outer handle rod (B) as shown.
4.
Remove the front door latch.
NOTE: Take care not to bend the outer handle rod, the inner handle cable (C), and the latch cable (D).
3.
Front Door Inner Handle Cable and Lath Cable - Remove
1.
Open the latch protector cover (A).
2.
Disconnect the latch cable (A) and the inner handle cable (B).
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
If the inner handle cable end is damaged or stress-whitened, replace it with a new one.
Make sure the front door outer handle rod (A) goes into the latch (B) securely.
Menu
Homepage
HONDA
CR-V 2012
Privacy Policy
About Us
Terms of Use
Contact Us
SERVICE MANUALS