Detach the clips (A), then pull out the upper edge of the rear door outer molding (B) from the edge of the sash. If necessary, cut the double-sided adhesive tape (C) with a utility knife.
2.
Rear Door Outer Molding - Install
1.
Scrape off the remaining double-sided adhesive tape from the sash, then clean the surface with a sponge dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
2.
Install a new rear door outer molding (A).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
