Rear Door Wheel Arch Protector Removal and Installation
1. Rear Door Wheel Arch Protector - Remove

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: If you are reusing the original rear door wheel arch protector (A), apply primer to the areas where new double-sided adhesive tapes (B, C, and D) will be applied, then attach new double-sided adhesive tapes to the rear door wheel arch protector as shown.
Adhesive tape (B):
Thickness 1.2 mm (0.047 in)
Width 6 mm (0.24 in)
Length 48 mm (1.89 in)
Adhesive tape (C):
Thickness 1 mm
(0.04 in)
Width 6 mm (0.24 in)
Length 18 mm (0.71 in)
Adhesive tape (D):
Thickness 1.2 mm (0.047 in)
Width 6 mm (0.24 in)
Length 18 mm (0.71 in)