CR-V RM1/RM4,RE5/RE6 year 2012-2016
Twitter
Facebook
Snapchat
Instagram
Medium
Roof Rail Removal and Installation
1.
Roof Rail Cover - Remove
1.
Remove the screw (A) with a TORX T15 bit, then pull up the clip area of the roof rail cover (B).
NOTE: Do not pull up the roof rail cover too high so that the hook (C) will not get damaged.
2.
Pull up the clip area (A) of the roof rail cover (B).
NOTE: Hold the hook area (C) so that it will not get damaged when removing the clip (D) of the forefront.
3.
Slide the roof rail cover (A) forward to release it from the projection (B) of the roof rail base.
4.
Remove the roof rail cover.
2.
Roof Rail Base - Remove
3.
Rear Roof Side Trim - Remove
1.
If necessary, slide the rear roof side trim (A) forward to release it from the body.
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
Menu
Homepage
HONDA
CR-V 2012
Privacy Policy
About Us
Terms of Use
Contact Us
SERVICE MANUALS