Ceiling Light Removal, Installation, and Test
1. Ceiling Light - Remove
1.
Turn the ceiling light switch OFF.
2.
Carefully pry off the lens (A).
3.
Remove the ceiling light (B).
4.
Disconnect the connector.
5.
Remove the bulb.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Ceiling Light - Test
NOTE: When doing the ceiling light test, make sure to install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb.
3.
If the continuity is still not as specified, replace the ceiling light (A).