To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage.
Do not twist the brake hose and the parking brake cable excessively.
5.
Brake Disc - Remove
1.
Remove the brake disc/drum flathead screws (A).
2.
Remove the brake disc/drum (B).
NOTE:
Remove the access plug (C), then if necessary, turn the adjuster nut (D) with a flat-tip screwdriver until the shoes become loose.
If the brake disc/drum is stuck to the hub bearing unit, thread two 8 x 1.25 mm bolts (E) into the brake disc/drum to push it away from the hub bearing unit. Turn each bolt 90 degrees at a time to prevent the brake disc/drum from binding.
6.
All Removed Parts - Install
1.
Install the brake disc in the reverse order of removal.
NOTE: Before installing the brake disc, clean the mating surfaces between the front hub and the inside of the brake disc.
