Ignition Coil and Spark Plug Removal and Installation
1. Ignition Coil and Spark Plug - Remove
1.
Remove the ignition coil cover (A).
2.
Disconnect the connectors (B).
3.
Remove the ignition coils (C).
4.
Remove the spark plugs (D).

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: When the spark plugs installing, apply a small amount of anti-seize compound to the spark plug threads, and screw the spark plugs into the cylinder head, finger-tight, then tighten the spark plugs to the specified torque.

3. Maintenance Minder - Reset (With Maintenance Minder System)
1.
If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").