DTC Troubleshooting: B1659
DTC B1659: Front Interior LF Antenna Circuit Short
DTC Description
DTC
Front interior LF antenna circuit short
 

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1.
Problem verification:

Problem verification
?1.
Clear the DTCs with the HDS.


?2.
Select the KEYLESS ACCESS CONTROL UNIT from the ONE-PUSH START system select menu with the HDS, and enter the SELF CHECK.

  

?3.
Do the SELF CHECK.

?4.
Check for DTCs with the HDS.
DTC Description
DTC
Front interior LF antenna circuit short
 

Is DTC B1659 indicated?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?
2.
Shorted wire check (EXT F+, EXT F- lines):

Shorted wire check (EXT F+, EXT F- lines)
?1.
Turn the vehicle to the OFF (LOCK) mode.

?2.
Disconnect the following connectors.
Keyless access control unit connector A (32P)
Front interior LF antenna 2P connector

?3.
Check for continuity between test points 1 and 2 individually.
Test condition
Vehicle OFF (LOCK) mode
Keyless access control unit connector A (32P): disconnected
Front interior LF antenna 2P connector: disconnected
Test point 1
Test point 2
Body ground

Test point 1
Test point 2
Body ground

Is there continuity?

     
YES
     
     
     
Repair a short to ground in the wire.?
     
NO
     
     
     
The EXT F+ and EXT F- wires are not shorted. Go to step 3.
3.
Shorted wire check (EXT F+ line to EXT F- line):

Shorted wire check (EXT F+ line to EXT F- line)
?1.
Check for continuity between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Keyless access control unit connector A (32P): disconnected
Front interior LF antenna 2P connector: disconnected
Test point 1
Test point 2

Is there continuity?

     
YES
     
     
     
Repair a short in EXT F+ wire to EXT F- wire.?
     
NO
     
     
     
The EXT F+ and EXT F- wires are OK. Go to step 4.
4.
Keyless access control unit EXT F+, EXT F- line output check:

Keyless access control unit EXT F+, EXT F- line output check
?1.
Reconnect the following connector.

?2.
Turn the vehicle to the ON mode.

?3.
Select KEYLESS ACCESS CONTROL from the ONE-PUSH START system select menu with the HDS, and enter FUNCTIONAL TESTS.

  

?4.
Connect the voltmeter between test points 1 and 2.
Test point 1
Front interior LF antenna 2P connector No. 2
Test point 2
Front interior LF antenna 2P connector No. 1


?5.
Select FRONT INTERIOR ANTENNA with the HDS.

Is there voltage?

     
YES
     
     
     
Faulty front interior LF antenna: Replace the front interior LF antenna .?
     
NO