Front Seat Belt Buckle Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

2. Front Seat Belt Buckle - Remove

Driver's seat - Without DPMS

Driver's seat - With DPMS

Passenger's seat - Without seat weight sensor

Passenger's seat - With seat weight sensor

1.
Disconnect the connector (A).

2.
Detach the connector clip (B) and the harness clip(s) (C).

3.
Pry up the hooks (D) of the harness holders (E), then release them from the seat cushion frame springs (F).





Driver's seat - Without DPMS

Driver's seat - With DPMS

Passenger's seat - Without seat weight sensor

Passenger's seat - With seat weight sensor
4.
Passenger's seat: Release the hook strip (A), then turn over the seat cushion cover.

5.
Detach the harness clip(s) (B).

6.
Remove the seat belt buckle (C).

3. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

NOTE: Assemble the washers (A), the bearing (B) and the collar (C) on the anchor bolt (D) as shown.