Disconnect the front drain tubes (A), the rear drain tubes (B), and the connector (C).
2.
Detach the harness clips (A), and remove the cushion tapes (B).
3.
With an assistant holding the frame (A), remove the bolts (B, C) starting at the rear, and release the hooks (D) by moving the frame forward, then carefully remove the frame.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE
Before installing the frame, clear the drain tubes and the drain valves using compressed air.
Check the frame seal.
When installing the frame, first attach the rear hook into the body holes.
When connecting the drain tubes, slide them over the frame nozzles at least 10 mm (0.39 in).
Pull the front drain valve (A) out of the body hole.
2.
Remove the clip (B),
3.
Tie a string to the top end of the front drain tube (C), then pull the drain tube down out of the pillar. Leave the string in the pillar to use when reinstalling the drain tube.
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE
To install a new drain tube, tie the string left in the body during drain tube removal to the top end of the new drain tube, and pull it up into the roof.
Install the tube clips (A) on the drain tubes (B) as shown.
When connecting the drain tubes, slide them over the frame nozzles at least 10 mm (0.39 in).
Pull the rear drain valve (A) out of the body hole.
2.
With power tailgate: Detach the cushion tape (B).
3.
Tie a string to the top end of the rear drain tube (C), then pull the drain tube down out of the pillar. Leave the string in the pillar to use when reinstalling the drain tube.
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE
To install a new drain tube, tie the string left in the body during drain tube removal to the top end of the new drain tube, and pull it up into the roof.
Install the tube clips (A) on the drain tubes (B) as shown.
When connecting the drain tubes, slide them over the frame nozzles at least 10 mm (0.39 in).
