DTC Troubleshooting: P2583-64
DTC P2583-64: Millimeter Wave Radar Aiming Error
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
DTC
Freeze Frame
P2583-64 Millimeter Wave Radar Aiming Error
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode.

?4.
Test-drive the vehicle on a straight road at speeds 25 mph (40 km/h) or more for 5 minutes with the ACC activated.
NOTE: Drive the vehicle on the road, not on a lift.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
P2583-64 Millimeter Wave Radar Aiming Error
    

Is DTC P2583-64 indicated?

     
YES
     
     
     
The failure is duplicated. Go to step 2.
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?
2.
Millimeter wave radar installation check:

Millimeter wave radar installation check
?1.
Remove the front bumper.

?2.
Check the installation of the millimeter wave radar and the bracket.

Is the installation OK?

     
YES
     
     
     
Go to step 3.
     
NO
     
     
     
Reinstall or replace the part that has a problem, then go to step 3.
3.
Millimeter wave radar aiming:

Millimeter wave radar aiming
?1.
Install the front bumper.

?2.
Aim the millimeter wave radar.

?3.
Turn the vehicle to the ON mode.

?4.
Clear the DTC with the HDS.


?5.
Turn the vehicle to the OFF (LOCK) mode.

?6.
Test-drive the vehicle on a straight road at speeds 25 mph (40 km/h) or more for 5 minutes with the ACC activated.
NOTE: Drive the vehicle on the road, not on a lift.

?7.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
P2583-64 Millimeter Wave Radar Aiming Error
    

Is DTC P2583-64 indicated?

     
YES
     
     
     
Check for loose or poor connections. If OK, replace the millimeter wave radar.?
     
NO
     
     
     
Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.?