Rear Door Latch Removal and Installation
2. Rear Door Latch - Remove


1.
Remove the child lock trim (A), and detach the cable clip (B).

2.
Remove the bolts (C) with a TORX T30 bit.






3.
Slide the rear door latch (A) down to disconnect the outer handle rod (B) as shown.

4.
Remove the rear door latch.

NOTE: Take care not to bend the outer handle rod, the inner handle cable (C), and the latch cable (D).

3. Rear Door Inner Handle Cable and Latch Cable - Remove

1.
Open the latch protector covers (A).





2.
Disconnect the inner handle cable (A) and the latch cable (B).

4. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

NOTE:
If the inner handle cable end is damaged or stress-whitened, replace it with a new one.
Make sure the rear door outer handle rod (A) goes into the latch (B) securely.