Millimeter Wave Radar Removal and Installation
2. Millimeter Wave Radar Assembly - Remove
NOTE: Do not disassemble the millimeter wave radar.
1.
Disconnect the connector (A).
2.
Remove the millimeter wave radar assembly (B).
3.
Remove the screws (A).
4.
Remove the millimeter wave radar (C) from the bracket.
5.
If necessary, remove these items:
Spacer B
Aiming bolt (D)
Grip (E)

3. Radar bracket - Remove
1.
Remove the radar bracket (A).
NOTE: Check for bent or damage at the radar bracket. If necessary, replace the radar bracket.

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: After installing the millimeter wave radar, measure the clearance 29.1 mm (1.146 in) between the millimeter wave radar and its bracket.
If the clearance is out of the standard, adjust the aiming bolt.