Rear Differential Oil Seal Replacement
Special Tools Required
Image Description/Tool Number
310169.png Driver Handle, 15 x 135L 07749-0010000
310215.png Oil Seal Driver, 65 mm 07JAD-PL90100
361910.png Oil Seal Driver Attachment 07NAD-P20A100
310246.png Bearing Driver Attachment, 78 x 80 mm 07NAD-PX40100
Driveshaft Side

3. Left Side Oil Seal - Remove


4. Right Side Oil Seal - Remove


5. Left Side Oil Seal - Install

1.
Install a new left side oil seal (A) even and flush with the machined edge of the differential carrier assembly using the 15 x 135L driver handle and the oil seal driver attachment.

6. Right Side Oil Seal - Install


1.
Install a new rear differential right side oil seal (A) squarely using the 15 x 135L driver handle and the 78 x 80 mm bearing driver attachment.

2.
Installation depth (B) of the oil seal is 9mm (0.35 in) below the machined edge of the differential carrier assembly.

Propeller Shaft Side

5. Oil Seal - Remove


6. Oil Seal - Install

1.
Install a new rear differential propeller shaft side oil seal (A) even and flush with the torque control differential (TCD) case using the 65 mm oil seal driver.